Class 10 · Science

Science
revision notes.

440 concise study points across 13 chapters. Jump straight to any chapter below.

13Chapters
440Points
Class 10CBSE
FreeNo sign-up

Chapter 1

7 sections

Key Concepts

  • Chemical Reaction: A process in which one or more substances (reactants) are converted into one or more new substances (products) with different properties.
  • Chemical Equation: A symbolic representation of a chemical reaction using formulae and symbols. Example: 2Mg + O₂ → 2MgO
  • Balanced Equation: An equation where the number of atoms of each element is equal on both sides (Law of Conservation of Mass).
  • Skeleton Equation: An unbalanced equation that shows only the formulae of reactants and products.
  • Coefficients: Numbers placed before formulae to balance the equation. Never change the subscripts in a formula.

Types of Chemical Reactions

  • Combination Reaction: Two or more substances combine to form a single product. Example: CaO + H₂O → Ca(OH)₂
  • Decomposition Reaction: A single compound breaks down into two or more simpler substances. Can be thermal, electrolytic, or photolytic.
  • Displacement Reaction: A more reactive element displaces a less reactive element from its compound. Example: Fe + CuSO₄ → FeSO₄ + Cu
  • Double Displacement Reaction: Exchange of ions between two compounds, usually forming a precipitate. Example: Na₂SO₄ + BaCl₂ → BaSO₄↓ + 2NaCl
  • Redox Reaction: Reactions involving both oxidation (loss of electrons/gain of oxygen) and reduction (gain of electrons/loss of oxygen) simultaneously.

Oxidation and Reduction

  • Oxidation: Gain of oxygen OR loss of hydrogen by a substance. The substance that gets oxidized is called a reducing agent.
  • Reduction: Loss of oxygen OR gain of hydrogen by a substance. The substance that gets reduced is called an oxidizing agent.
  • Corrosion: Slow eating away of metals by the action of air, moisture, or chemicals. Example: Rusting of iron (4Fe + 3O₂ + xH₂O → 2Fe₂O₃·xH₂O).
  • Rancidity: Oxidation of fats and oils in food, giving an unpleasant smell and taste. Prevented by adding antioxidants, storing in airtight containers, or flushing with nitrogen.

Important Formulas & Equations

  • Burning of magnesium: 2Mg + O₂ → 2MgO (combination, exothermic)
  • Decomposition of limestone: CaCO₃ →(heat) CaO + CO₂ (thermal decomposition)
  • Decomposition of water: 2H₂O →(electricity) 2H₂ + O₂ (electrolytic decomposition)
  • Displacement: Zn + CuSO₄ → ZnSO₄ + Cu
  • Rusting of iron: 4Fe + 3O₂ + xH₂O → 2Fe₂O₃·xH₂O

Balancing Chemical Equations

  • Step 1: Write the skeleton equation with correct formulae.
  • Step 2: Count atoms of each element on both sides.
  • Step 3: Start balancing with the element that appears in the fewest formulae, or balance metals first.
  • Step 4: Use coefficients (not subscripts) to balance.
  • Step 5: Verify — total atoms of each element must be equal on both sides.
  • Example: Fe + H₂O → Fe₃O₄ + H₂ becomes 3Fe + 4H₂O → Fe₃O₄ + 4H₂

Effects of Chemical Reactions

  • Exothermic Reactions: Release heat energy. Examples: combustion, respiration, decomposition of vegetable matter.
  • Endothermic Reactions: Absorb heat energy. Examples: thermal decomposition of CaCO₃, photosynthesis.
  • Signs of a chemical reaction: change in colour, change in state, evolution of gas, change in temperature, formation of precipitate.

Tips & Common Mistakes

  • Always balance the equation before identifying the reaction type.
  • Don't confuse combination with displacement — combination forms ONE product, displacement replaces an element.
  • In redox reactions, identify what is oxidized and reduced separately. The substance oxidized is the reducing agent (and vice versa).
  • Remember the activity series for displacement reactions — a more reactive metal displaces a less reactive one.
  • Precipitate is shown by ↓ arrow, gas evolved by ↑ arrow in equations.

Chapter 2

5 sections

Key Concepts

  • Acids are substances that produce H⁺ (hydrogen) ions when dissolved in water. Example: HCl, H₂SO₄, CH₃COOH
  • Bases are substances that produce OH⁻ (hydroxide) ions when dissolved in water. Example: NaOH, KOH, Ca(OH)₂
  • pH scale measures the strength of acid or base on a scale of 0–14. pH < 7 is acidic, pH = 7 is neutral, pH > 7 is basic
  • Indicators are substances that change colour in acidic or basic solutions. Examples: Litmus, Methyl orange, Phenolphthalein
  • Neutralisation is the reaction between an acid and a base to form salt and water: Acid + Base → Salt + Water
  • Strong acids (HCl, H₂SO₄, HNO₃) dissociate completely in water; weak acids (CH₃COOH, H₂CO₃) dissociate partially

Important Reactions

  • Acid + Metal → Salt + Hydrogen gas: 2HCl + Zn → ZnCl₂ + H₂↑
  • Acid + Metal carbonate → Salt + Water + CO₂: Na₂CO₃ + 2HCl → 2NaCl + H₂O + CO₂↑
  • Acid + Metal bicarbonate → Salt + Water + CO₂: NaHCO₃ + HCl → NaCl + H₂O + CO₂↑
  • Acid + Base → Salt + Water (Neutralisation): NaOH + HCl → NaCl + H₂O
  • Acid + Metal oxide → Salt + Water: CuO + 2HCl → CuCl₂ + H₂O
  • Preparation of bleaching powder: Ca(OH)₂ + Cl₂ → CaOCl₂ + H₂O
  • Preparation of baking soda: NaCl + H₂O + CO₂ + NH₃ → NH₄Cl + NaHCO₃

Common Salts and Their Uses

  • Sodium chloride (NaCl) — Common salt; raw material for making NaOH, baking soda, washing soda, and bleaching powder
  • Sodium hydroxide (NaOH) — Caustic soda; made by electrolysis of brine (chlor-alkali process): 2NaCl + 2H₂O → 2NaOH + Cl₂ + H₂
  • Baking soda (NaHCO₃) — Used in fire extinguishers, antacids, and baking; mild non-corrosive base
  • Washing soda (Na₂CO₃·10H₂O) — Used in glass, soap, and paper industries; obtained by heating baking soda: 2NaHCO₃ → Na₂CO₃ + H₂O + CO₂
  • Bleaching powder (CaOCl₂) — Used for water purification and bleaching; made by action of chlorine on dry slaked lime
  • Plaster of Paris (CaSO₄·½H₂O) — Used for setting fractured bones, making toys and decorations; obtained by heating gypsum at 373 K

Acids and Bases in Everyday Life

  • Our stomach produces HCl to aid digestion; excess acid causes acidity, treated by antacids like milk of magnesia (Mg(OH)₂)
  • Tooth decay starts when pH in mouth falls below 5.5; using basic toothpaste neutralises the acid
  • Bee sting is acidic (methanoic acid) — apply baking soda; wasp sting is basic — apply vinegar
  • Soil pH affects plant growth; acidic soil is treated with quicklime (CaO) or slaked lime (Ca(OH)₂)
  • Rainwater with pH < 5.6 is called acid rain; caused by SO₂ and NO₂ dissolving in rain

Tips & Common Mistakes

  • Remember: Acids produce H⁺ ions only in aqueous (water) solution, not in dry state — dry HCl gas does not change litmus colour
  • Do not confuse baking soda (NaHCO₃) with washing soda (Na₂CO₃·10H₂O) — they have different formulas and uses
  • Water of crystallisation is the fixed number of water molecules present in one formula unit of a salt (e.g., CuSO₄·5H₂O has 5 water molecules)
  • When diluting an acid, always add acid to water slowly with stirring — never add water to acid (highly exothermic)
  • pH paper gives exact value; litmus only tells acidic or basic — know the difference for exams
  • The chlor-alkali process products: NaOH (at cathode), Cl₂ (at anode), H₂ (at cathode) — a common exam question

Chapter 3

6 sections

Key Concepts

  • Metals are elements that are lustrous, malleable, ductile, and good conductors of heat and electricity. Examples: Fe, Cu, Al, Au
  • Non-metals are elements that are brittle, non-lustrous (except iodine), and poor conductors. Examples: C, S, P, O₂
  • Malleability is the ability to be beaten into thin sheets; Ductility is the ability to be drawn into thin wires
  • Alloys are homogeneous mixtures of two or more metals (or a metal and a non-metal). Examples: Brass (Cu+Zn), Bronze (Cu+Sn), Steel (Fe+C)
  • An ore is a naturally occurring mineral from which a metal can be profitably extracted. Example: Bauxite (Al₂O₃·2H₂O) for Aluminium
  • Gangue is the unwanted impurities (sand, rocky material) present in the ore

Physical Properties Comparison

  • Metals are generally hard (exception: Na and K are soft, can be cut with a knife), have high melting points (exception: Gallium and Caesium melt in hand)
  • Metals are sonorous (produce ringing sound when struck); non-metals are not sonorous
  • Mercury is the only metal that is liquid at room temperature; Bromine is the only non-metal that is liquid at room temperature
  • Metals have 1–3 valence electrons and tend to lose electrons to form cations (M → M⁺ⁿ + ne⁻)
  • Non-metals have 4–8 valence electrons and tend to gain electrons to form anions (X + ne⁻ → X⁻ⁿ)
  • Ionic compounds have high melting/boiling points, conduct electricity in molten/aqueous state, and are generally soluble in water

Important Reactions

  • Metal + Oxygen → Metal oxide: 4Na + O₂ → 2Na₂O (basic oxide); 2Cu + O₂ → 2CuO
  • Metal + Water → Metal hydroxide + H₂: 2Na + 2H₂O → 2NaOH + H₂↑ (vigorous); 2K + 2H₂O → 2KOH + H₂↑
  • Metal + Acid → Salt + H₂: Fe + 2HCl → FeCl₂ + H₂↑ (Cu, Ag, Au do not react with dilute acids)
  • Metal + Salt solution → Displacement if more reactive: Fe + CuSO₄ → FeSO₄ + Cu (iron displaces copper)
  • Thermit reaction: 2Al + Fe₂O₃ → Al₂O₃ + 2Fe + Heat (used for welding railway tracks)
  • Roasting: 2ZnS + 3O₂ → 2ZnO + 2SO₂ (sulphide ore heated in air)
  • Calcination: ZnCO₃ → ZnO + CO₂ (carbonate ore heated in limited air)

Extraction of Metals

  • Reactivity series (decreasing): K > Na > Ca > Mg > Al > Zn > Fe > Ni > Sn > Pb > H > Cu > Hg > Ag > Au > Pt
  • Highly reactive metals (K, Na, Ca, Mg, Al) — extracted by electrolytic reduction of their molten ores
  • Medium reactive metals (Zn, Fe, Ni, Sn, Pb) — first converted to oxide (by roasting/calcination), then reduced using carbon: ZnO + C → Zn + CO
  • Low reactive metals (Cu, Hg, Ag, Au) — extracted by heating their ores in air: 2HgS + 3O₂ → 2HgO + 2SO₂, then 2HgO → 2Hg + O₂
  • Refining of metals is done by electrolytic refining — impure metal at anode, pure metal deposited at cathode, salt solution as electrolyte

Corrosion and Prevention

  • Corrosion is the slow deterioration of metals by chemical action of air, moisture, and acids. Iron rusting: 4Fe + 3O₂ + xH₂O → 2Fe₂O₃·xH₂O
  • Silver tarnishes (turns black) due to reaction with H₂S in air: 4Ag + 2H₂S + O₂ → 2Ag₂S + 2H₂O
  • Copper develops a green coating (basic copper carbonate): 2Cu + H₂O + CO₂ + O₂ → Cu(OH)₂·CuCO₃
  • Prevention methods: Painting, oiling/greasing, galvanisation (coating with zinc), electroplating, alloying
  • Stainless steel (Fe + Cr + Ni + C) resists corrosion; alloying changes properties — gold is alloyed with Cu/Ag for making jewellery (pure gold is 24 carat)

Tips & Common Mistakes

  • Memorise the reactivity series — it is essential for predicting displacement reactions and extraction methods
  • Aluminium is highly reactive but does not corrode easily because it forms a protective oxide layer (Al₂O₃)
  • Ionic bonds form between metals and non-metals; covalent bonds form between non-metals — do not confuse them
  • Amphoteric oxides (Al₂O₃, ZnO) react with both acids and bases — a frequently asked concept
  • In electrolytic refining, remember: Anode = impure metal, Cathode = pure metal, Electrolyte = salt solution of same metal
  • Aqua regia (3 parts conc. HCl + 1 part conc. HNO₃) can dissolve gold and platinum — no single acid can

Chapter 4

6 sections

Key Concepts

  • Carbon has atomic number 6, electronic configuration 2,4. It forms 4 covalent bonds due to tetravalency
  • Catenation is the unique ability of carbon to form bonds with other carbon atoms, creating long chains, branched chains, and rings
  • Hydrocarbons are compounds containing only carbon and hydrogen. Two types: Saturated (alkanes, single bonds) and Unsaturated (alkenes/alkynes, double/triple bonds)
  • Homologous series is a series of compounds with the same general formula, similar chemical properties, and successive members differing by CH₂ (14 u)
  • Isomers are compounds with the same molecular formula but different structural arrangements. Example: Butane (C₄H₁₀) has two isomers
  • Functional group is an atom or group of atoms that determines the chemical properties of an organic compound

Homologous Series & Functional Groups

  • Alkanes (CₙH₂ₙ₊₂): Methane CH₄, Ethane C₂H₆, Propane C₃H₈ — single bonds only (saturated)
  • Alkenes (CₙH₂ₙ): Ethene C₂H₄, Propene C₃H₆ — contain C=C double bond (unsaturated)
  • Alkynes (CₙH₂ₙ₋₂): Ethyne C₂H₂, Propyne C₃H₄ — contain C≡C triple bond (unsaturated)
  • Alcohol (-OH): Methanol CH₃OH, Ethanol C₂H₅OH — hydroxyl group
  • Carboxylic acid (-COOH): Methanoic acid HCOOH, Ethanoic acid CH₃COOH — carboxyl group
  • Aldehyde (-CHO): Methanal HCHO, Ethanal CH₃CHO | Ketone (>C=O): Propanone CH₃COCH₃

Important Reactions

  • Combustion: CH₄ + 2O₂ → CO₂ + 2H₂O + Heat and light (saturated hydrocarbons burn with clean blue flame)
  • Oxidation of ethanol: CH₃CH₂OH + Alkaline KMnO₄ → CH₃COOH (ethanol → ethanoic acid)
  • Addition reaction: CH₂=CH₂ + H₂ → CH₃-CH₃ (ethene + hydrogen → ethane, using Ni catalyst) — unsaturated → saturated
  • Substitution reaction: CH₄ + Cl₂ → CH₃Cl + HCl (in presence of sunlight) — saturated hydrocarbons undergo this
  • Esterification: CH₃COOH + C₂H₅OH → CH₃COOC₂H₅ + H₂O (acid catalyst; ester has sweet/fruity smell)
  • Saponification: Ester + NaOH → Sodium salt of carboxylic acid + Alcohol (basis of soap making)

Ethanol and Ethanoic Acid

  • Ethanol (C₂H₅OH): Liquid at room temperature, used as solvent and in alcoholic beverages. Boiling point 351 K
  • Ethanol reacts with sodium: 2C₂H₅OH + 2Na → 2C₂H₅ONa + H₂↑ (much less vigorous than water + Na)
  • Dehydration of ethanol: C₂H₅OH → C₂H₄ + H₂O (at 443 K with conc. H₂SO₄ as dehydrating agent)
  • Ethanoic acid (CH₃COOH): Also called acetic acid. 5-8% solution is vinegar. Freezes at 290 K (16.6°C), so called glacial acetic acid
  • Ethanoic acid reacts with bases, carbonates, bicarbonates, and metals just like mineral acids but is a weak acid
  • Ethanoic acid + NaHCO₃ → CH₃COONa + H₂O + CO₂↑ (brisk effervescence — a common lab test)

Soaps and Detergents

  • Soap is sodium or potassium salt of long-chain carboxylic acid (fatty acid). Example: C₁₇H₃₅COONa (sodium stearate)
  • Soap molecule has two parts: hydrophilic (ionic, water-loving) head and hydrophobic (hydrocarbon, water-repelling) tail
  • Micelle formation: Soap molecules arrange in clusters with hydrophobic tails inward (trapping oil/grease) and hydrophilic heads outward in water
  • Soaps do not work well in hard water — they react with Ca²⁺/Mg²⁺ ions to form insoluble scum (curdy precipitate)
  • Detergents are sodium salts of sulphonic acids; they work in both soft and hard water as they do not form scum

Tips & Common Mistakes

  • Saturated hydrocarbons undergo substitution reactions; unsaturated undergo addition reactions — do not mix these up
  • Carbon forms covalent bonds (sharing of electrons), not ionic bonds — it can neither gain nor lose 4 electrons easily
  • IUPAC naming: identify longest carbon chain, number from the end nearest to the functional group, use correct suffix (-ol, -al, -one, -oic acid)
  • Unsaturated hydrocarbons decolourise bromine water and acidified KMnO₄ — saturated ones do not. This is a key test
  • Diamond (each C bonded to 4 others, 3D) and graphite (each C bonded to 3 others, layers) are allotropes of carbon — know their properties
  • In esterification, the reaction is reversible; in saponification, it is irreversible — examiners test this distinction

Chapter 5

6 sections

Key Concepts

  • Life processes are the basic functions performed by living organisms to maintain life: Nutrition, Respiration, Transportation, and Excretion
  • Autotrophic nutrition: Organisms make their own food from inorganic substances (CO₂ and H₂O) using sunlight. Example: Green plants (photosynthesis)
  • Heterotrophic nutrition: Organisms depend on other organisms for food. Types: Saprophytic (dead matter), Parasitic (host), Holozoic (ingestion of food)
  • Photosynthesis: 6CO₂ + 6H₂O → C₆H₁₂O₆ + 6O₂ (occurs in chloroplasts, requires sunlight and chlorophyll)
  • Respiration is the biochemical process of breaking down glucose to release energy: C₆H₁₂O₆ + 6O₂ → 6CO₂ + 6H₂O + Energy (ATP)
  • Aerobic respiration uses oxygen and produces 38 ATP; Anaerobic respiration occurs without oxygen — produces ethanol + CO₂ (in yeast) or lactic acid (in muscles)

Nutrition in Humans

  • Alimentary canal: Mouth → Oesophagus → Stomach → Small intestine → Large intestine → Anus
  • Mouth: Salivary amylase breaks down starch into maltose (pH ~6.8). Teeth mechanically break food
  • Stomach: HCl creates acidic medium (pH ~2); Pepsin enzyme digests proteins into peptones. Mucus protects stomach lining
  • Small intestine: Bile (from liver) emulsifies fats; Pancreatic enzymes (trypsin, lipase, amylase) digest proteins, fats, carbohydrates. Villi absorb nutrients
  • Large intestine: Absorbs water and remaining nutrients. Undigested food is expelled through the anus
  • Villi increase surface area for absorption — they have thin walls, rich blood supply, and contain lacteals for fat absorption

Respiration in Humans

  • Pathway of air: Nostrils → Nasal cavity → Pharynx → Larynx → Trachea → Bronchi → Bronchioles → Alveoli
  • Alveoli are balloon-like structures in lungs with thin walls and rich blood supply — site of gas exchange by diffusion
  • During inhalation: Diaphragm contracts (flattens), ribs move up and out → chest cavity expands → air rushes in
  • During exhalation: Diaphragm relaxes (dome-shaped), ribs move down and in → chest cavity reduces → air is pushed out
  • Haemoglobin in RBCs carries oxygen as oxyhaemoglobin; CO₂ is mostly carried dissolved in plasma as bicarbonate ions

Transportation in Humans

  • Heart is a four-chambered muscular organ: 2 atria (upper, receive blood) and 2 ventricles (lower, pump blood). Right side has deoxygenated blood, left side has oxygenated blood
  • Double circulation: Blood passes through the heart twice in one complete cycle — pulmonary (heart → lungs → heart) and systemic (heart → body → heart)
  • Arteries carry blood away from heart (thick-walled, no valves); Veins carry blood towards heart (thin-walled, have valves); Capillaries are thin-walled for exchange
  • Blood pressure: Systolic (ventricle contracts) ~120 mm Hg; Diastolic (ventricle relaxes) ~80 mm Hg. Normal BP = 120/80
  • Blood components: Plasma (55%, carries dissolved substances), RBCs (carry O₂), WBCs (fight infection), Platelets (clotting)
  • In plants, xylem transports water and minerals (upward, unidirectional); phloem transports food/sucrose (bidirectional, translocation)

Excretion

  • Excretion is removal of metabolic waste products. Main excretory organ in humans: Kidneys (remove urea from blood → urine)
  • Excretory system: 2 Kidneys → 2 Ureters → Urinary bladder → Urethra
  • Nephron is the structural and functional unit of kidney. Each kidney has about 1 million nephrons
  • Nephron parts: Bowman's capsule (filtration) → Proximal tubule → Loop of Henle → Distal tubule → Collecting duct
  • Urine formation: Glomerular filtration (blood filtered in Bowman's capsule) → Selective reabsorption (glucose, amino acids, water reabsorbed) → Tubular secretion
  • In plants, waste is stored in vacuoles, old leaves, bark; excess water removed by transpiration; O₂ and CO₂ removed via stomata

Tips & Common Mistakes

  • Photosynthesis occurs in chloroplasts, respiration in mitochondria — do not confuse their locations
  • Arteries always carry blood away from heart (not always oxygenated) — pulmonary artery carries deoxygenated blood
  • Veins always carry blood towards heart (not always deoxygenated) — pulmonary vein carries oxygenated blood
  • Stomata open when guard cells swell (turgid) due to water uptake; close when they lose water (flaccid)
  • Differentiate: Transpiration (loss of water vapour from leaves) vs Translocation (transport of food in phloem)
  • In anaerobic respiration, yeast produces ethanol + CO₂ (fermentation); muscles produce lactic acid (causes cramps)

Chapter 6

5 sections

Key Concepts

  • Control and coordination in animals is achieved by the nervous system and the endocrine (hormonal) system
  • Neuron (nerve cell) is the structural and functional unit of the nervous system. Parts: Cell body (cyton), Dendrites (receive impulse), Axon (transmit impulse)
  • Synapse is the gap between the axon terminal of one neuron and the dendrite of the next neuron. Nerve impulses cross this gap using chemical signals (neurotransmitters)
  • Reflex action is a quick, automatic, involuntary response to a stimulus. The pathway is called a reflex arc
  • Reflex arc: Stimulus → Receptor → Sensory nerve → Spinal cord (relay neuron) → Motor nerve → Effector (muscle/gland) → Response
  • Hormones are chemical messengers secreted by endocrine (ductless) glands directly into the blood, which act on specific target organs

Human Nervous System

  • Central Nervous System (CNS): Brain + Spinal cord. Peripheral Nervous System (PNS): All nerves arising from brain and spinal cord
  • Brain has three main parts: Forebrain (cerebrum — thinking, memory, sensations), Midbrain (controls reflex of eye, ear), Hindbrain (cerebellum — balance; medulla — involuntary actions)
  • Cerebrum is the largest part of brain — has sensory areas, motor areas, and association areas for higher functions like reasoning
  • Medulla oblongata controls involuntary actions: breathing, heartbeat, blood pressure, vomiting, sneezing
  • Spinal cord conducts reflex actions and transmits messages between brain and body. Protected by vertebral column
  • Three types of neurons: Sensory (receptor to CNS), Motor (CNS to effector), Relay/Connector (within CNS, connects sensory to motor)

Endocrine Glands and Hormones

  • Pituitary gland (master gland): Secretes growth hormone (GH). Deficiency causes dwarfism; excess causes gigantism
  • Thyroid gland: Secretes thyroxine (contains iodine). Regulates metabolism. Deficiency causes goitre (neck swelling). Iodised salt prevents it
  • Pancreas (dual function): Insulin lowers blood sugar (converts glucose to glycogen); Glucagon raises blood sugar. Insulin deficiency causes diabetes
  • Adrenal glands: Secrete adrenaline (fight-or-flight hormone). Increases heart rate, BP, breathing rate in emergencies
  • Testes (males): Secrete testosterone — controls male secondary sexual characteristics (facial hair, deep voice)
  • Ovaries (females): Secrete estrogen and progesterone — control female secondary sexual characteristics and menstrual cycle

Coordination in Plants

  • Plants coordinate using phytohormones (plant hormones). No nervous system in plants
  • Auxin: Promotes cell elongation, phototropism (growth towards light), and gravitropism. Produced at shoot tip
  • Gibberellins: Promote stem growth and seed germination. Cytokinins: Promote cell division, found mainly in roots
  • Abscisic acid (ABA): Inhibits growth, promotes wilting of leaves (stress hormone). Ethylene: Promotes fruit ripening
  • Tropic movements (directional, growth-dependent): Phototropism (light), Geotropism (gravity), Hydrotropism (water), Chemotropism (chemicals), Thigmotropism (touch)
  • Nastic movements are non-directional, independent of stimulus direction. Example: Folding of leaves in Mimosa pudica (touch-me-not) — caused by change in water pressure

Tips & Common Mistakes

  • Reflex actions are controlled by spinal cord (not brain) — this is why they are quick and involuntary
  • Do not confuse voluntary actions (controlled by cerebrum) with involuntary actions (controlled by medulla) with reflex actions (spinal cord)
  • Endocrine glands are ductless (secrete into blood); Exocrine glands have ducts (e.g., salivary, sweat glands)
  • Pancreas is both endocrine (insulin, glucagon into blood) and exocrine (digestive enzymes into duodenum via duct)
  • In phototropism, auxin moves to the shaded side → cells on shaded side elongate more → shoot bends towards light
  • Feedback mechanism: When thyroxine level is high, pituitary reduces TSH; when low, pituitary increases TSH — this is negative feedback

Chapter 7

6 sections

Key Concepts

  • Reproduction is the biological process by which organisms produce offspring of their own kind to ensure continuity of species
  • Asexual reproduction involves a single parent; offspring are genetically identical to the parent (clones). No gamete formation
  • Sexual reproduction involves two parents (male and female); offspring show genetic variation due to fusion of gametes (fertilisation)
  • DNA (Deoxyribonucleic Acid) in the nucleus carries genetic information. DNA copying (replication) is essential for reproduction
  • Variations arise due to inaccuracies during DNA replication — these may be beneficial, harmful, or neutral for survival
  • Puberty is the period when reproductive organs become functional. In humans: 10–12 years (girls), 12–14 years (boys)

Asexual Reproduction Methods

  • Fission: Organism splits into two (binary fission in Amoeba) or many (multiple fission in Plasmodium/malarial parasite)
  • Budding: A small bud grows on the parent body, develops, and detaches as a new organism. Example: Hydra, Yeast
  • Fragmentation: Organism breaks into fragments, each growing into a new individual. Example: Spirogyra (filamentous alga)
  • Regeneration: Organisms can regrow from a cut body part using specialised cells. Example: Planaria, Hydra. Not same as reproduction
  • Spore formation: Sporangia burst to release spores that germinate in moist conditions. Example: Rhizopus (bread mould)
  • Vegetative propagation: New plants from vegetative parts — stem (potato tuber, ginger rhizome), leaf (Bryophyllum), root (sweet potato). Includes layering, cutting, grafting

Sexual Reproduction in Flowering Plants

  • Flower is the reproductive organ. Parts: Sepals (calyx), Petals (corolla), Stamens (male — anther + filament), Pistil/Carpel (female — stigma + style + ovary)
  • Pollen grains (male gametes) are produced in the anther. Ovules (containing female gamete/egg) are inside the ovary
  • Pollination is transfer of pollen from anther to stigma. Self-pollination (same flower) or Cross-pollination (different flower, by wind/water/insects)
  • After pollination, pollen tube grows through style to reach ovule. Male gamete fuses with egg (fertilisation) → Zygote
  • Post-fertilisation: Zygote → Embryo; Ovule → Seed (contains embryo + food store); Ovary → Fruit (protects seeds)
  • Seed germination: When conditions (water, warmth, air) are favourable, the embryo in the seed grows into a new plant

Sexual Reproduction in Humans

  • Male reproductive system: Testes (produce sperm + testosterone), Vas deferens (sperm duct), Seminal vesicles + Prostate gland (add fluid → semen), Urethra, Penis
  • Female reproductive system: Ovaries (produce ova/eggs + estrogen), Oviducts/Fallopian tubes (site of fertilisation), Uterus (implantation + development), Vagina
  • Fertilisation occurs in the fallopian tube. Zygote divides repeatedly while moving to uterus, implants in uterine wall (implantation)
  • Placenta: Disc-shaped tissue embedded in uterine wall that provides nutrients and oxygen to the embryo from mother's blood and removes waste. Also acts as a barrier
  • Gestation period in humans is approximately 9 months (38 weeks). At the end, the uterine muscles contract rhythmically to deliver the baby (parturition)
  • Menstruation: If egg is not fertilised, the thickened uterine lining breaks down and is released as blood through the vagina. Cycle is ~28 days

Reproductive Health & Contraception

  • Barrier methods: Condoms (prevent sperm from reaching egg), Diaphragm — also prevent STDs
  • Chemical methods: Oral contraceptive pills (hormonal, prevent ovulation), Copper-T (IUCD placed in uterus, prevents implantation)
  • Surgical methods: Vasectomy (cutting vas deferens in males), Tubectomy (cutting/blocking fallopian tubes in females)
  • STDs (Sexually Transmitted Diseases): Bacterial — Gonorrhoea, Syphilis; Viral — HIV-AIDS, Genital warts
  • Using condoms is the only method that prevents both pregnancy and transmission of STDs including HIV

Tips & Common Mistakes

  • DNA copying is not perfectly accurate — the variations produced are the basis for evolution. Without variation, species cannot adapt
  • Regeneration is NOT the same as reproduction — regeneration requires specialised cells and occurs from a cut part; reproduction creates a new organism
  • Unisexual flowers have only stamens OR pistil (e.g., Papaya, Watermelon); Bisexual flowers have both (e.g., Hibiscus, Mustard)
  • In humans, sex of the baby is determined by the father: XX = girl, XY = boy. Mother always contributes X chromosome
  • Placenta has villi (finger-like projections) to increase surface area for exchange — similar concept to villi in intestine
  • Know the difference: Pollination (pollen to stigma) vs Fertilisation (fusion of male and female gametes)

Chapter 8

6 sections

Key Concepts

  • Heredity is the transmission of characters (traits) from parents to offspring. Genetics is the study of heredity and variation
  • Gene is the functional unit of heredity — a segment of DNA that codes for a specific protein/trait. Located on chromosomes
  • Alleles are different forms of the same gene. Example: Gene for height has two alleles — Tall (T) and Short (t)
  • Dominant trait is expressed even in heterozygous condition (Tt). Recessive trait is expressed only in homozygous condition (tt)
  • Genotype is the genetic makeup (TT, Tt, tt). Phenotype is the physical appearance (Tall, Short)
  • Humans have 23 pairs of chromosomes (46 total): 22 pairs of autosomes + 1 pair of sex chromosomes (XX in females, XY in males)

Mendel's Laws of Inheritance

  • Gregor Mendel is the Father of Genetics. He worked on garden pea (Pisum sativum) — chose 7 contrasting pairs of traits
  • Monohybrid cross (one trait): Tt x Tt → TT : Tt : Tt : tt = 1:2:1 (genotypic ratio). Phenotypic ratio = 3 Tall : 1 Short (3:1)
  • Law of Dominance: In a heterozygous organism, only the dominant allele is expressed in the phenotype
  • Law of Segregation: During gamete formation, the two alleles of a gene separate so that each gamete receives only one allele
  • Dihybrid cross (two traits): RrYy x RrYy gives phenotypic ratio 9:3:3:1 (Round Yellow : Round Green : Wrinkled Yellow : Wrinkled Green)
  • Law of Independent Assortment: Genes for different traits are inherited independently of each other (when on different chromosomes)

Sex Determination

  • In humans, sex is determined by sex chromosomes: Female = XX, Male = XY
  • All eggs carry X chromosome (from mother). Sperm can carry X or Y (from father). So the father determines the sex of the child
  • If sperm with X fertilises egg (X) → XX → Girl. If sperm with Y fertilises egg (X) → XY → Boy. Probability = 50% each
  • In some organisms sex determination is different: In birds, ZW system (females ZW, males ZZ). In some reptiles, temperature determines sex

Evolution

  • Evolution is the gradual change in inherited characteristics of biological populations over generations
  • Charles Darwin proposed Natural Selection: Organisms with favourable variations survive better, reproduce more, and pass on those traits
  • Homologous organs have same basic structure but different functions — indicate common ancestry. Example: Forelimbs of human, whale, bat, horse
  • Analogous organs have different basic structure but similar functions — indicate convergent evolution. Example: Wings of bird and wings of insect
  • Fossils are preserved remains/traces of organisms from past. They provide direct evidence of evolution. Dated using carbon-14 dating and rock layer analysis
  • Speciation occurs due to: Geographic isolation, Genetic drift, Natural selection, and Reproductive isolation — leading to formation of new species

Evidence for Evolution

  • Vestigial organs: Organs that are non-functional in present species but were functional in ancestors. Example: Appendix, wisdom teeth in humans
  • Embryological evidence: Embryos of different vertebrates look similar in early stages — suggests common ancestor
  • Molecular phylogeny: Comparing DNA/protein sequences across species reveals evolutionary relationships — more similar DNA = more closely related
  • Artificial selection by humans: From wild cabbage, humans created broccoli, cauliflower, kohlrabi, kale by selecting for different traits
  • Evolution does not mean 'progress' from lower to higher — it is about survival of the fittest in a given environment

Tips & Common Mistakes

  • In Mendel's cross, F₁ generation shows only dominant trait; F₂ shows both dominant and recessive in 3:1 ratio
  • Do not confuse homologous organs (same structure, different function) with analogous organs (different structure, same function)
  • Acquired traits (like muscular body from exercise) are NOT inherited — only traits coded in DNA are passed to offspring
  • Evolution is not the same as progress — bacteria are still among the most successful organisms despite being 'simple'
  • For sex determination questions: Always show the cross — Mother (XX) x Father (XY) → Daughters (XX) and Sons (XY) in 1:1 ratio
  • Genetic drift has a larger effect on small populations — it causes random changes in gene frequency, not related to survival advantage

Chapter 9

6 sections

Key Concepts

  • Light is an electromagnetic wave that travels in straight lines (rectilinear propagation). Speed of light in vacuum: 3 x 10⁸ m/s
  • Reflection is the bouncing back of light from a polished surface. Laws: (i) Angle of incidence = Angle of reflection (ii) Incident ray, reflected ray, and normal lie in the same plane
  • Refraction is the bending of light when it passes from one transparent medium to another due to change in speed
  • Refractive index (n) = Speed of light in vacuum / Speed of light in medium = c/v. It is also equal to sin i / sin r (Snell's law)
  • A real image is formed by actual convergence of light rays (can be obtained on screen). A virtual image is formed by apparent divergence (cannot be obtained on screen)
  • Focal length (f) is the distance between the principal focus and the optical centre/pole of a lens/mirror

Spherical Mirrors

  • Concave mirror: Reflecting surface curves inward. Converges light. Used in torches, headlights, shaving mirrors, solar furnaces, by dentists
  • Convex mirror: Reflecting surface curves outward. Diverges light. Used as rear-view mirrors in vehicles (wider field of view, erect image)
  • Mirror formula: 1/v + 1/u = 1/f where v = image distance, u = object distance, f = focal length. Also: R = 2f (radius of curvature)
  • Magnification (m) = h'/h = -v/u where h' = image height, h = object height. Positive m = erect image, Negative m = inverted image
  • Sign convention (New Cartesian): All distances measured from pole. Along incident light = positive, opposite = negative. Above principal axis = positive, below = negative
  • Concave mirror image positions: Object at infinity → image at F (real, inverted, point-sized); Object at C → image at C (real, inverted, same size); Object between F and P → image behind mirror (virtual, erect, magnified)

Refraction and Lenses

  • When light goes from rarer to denser medium (air to glass), it bends towards the normal (slows down). Denser to rarer → bends away from normal (speeds up)
  • Convex lens (converging): Thicker at centre. Forms real and inverted images (except when object is between F and optical centre → virtual, erect, magnified). Used in magnifying glass, camera, eye
  • Concave lens (diverging): Thinner at centre. Always forms virtual, erect, diminished images. Used in spectacles for myopia (short-sightedness)
  • Lens formula: 1/v - 1/u = 1/f. Magnification: m = h'/h = v/u
  • Power of a lens: P = 1/f (f in metres). Unit: Dioptre (D). Convex lens → positive power; Concave lens → negative power
  • When multiple lenses are in contact: P(total) = P₁ + P₂ + P₃ + ...

Important Formulas

  • Mirror formula: 1/v + 1/u = 1/f
  • Lens formula: 1/v - 1/u = 1/f
  • Magnification (mirror): m = -v/u = h'/h
  • Magnification (lens): m = v/u = h'/h
  • Snell's law: n₁ sin i = n₂ sin r, or n = sin i / sin r (for air to medium)
  • Power of lens: P = 1/f (in metres) — unit is Dioptre (D)
  • Relationship: R = 2f (Radius of curvature = 2 x Focal length, for mirrors)

Ray Diagram Rules

  • Concave mirror: (i) Ray parallel to principal axis → passes through F after reflection (ii) Ray through F → becomes parallel (iii) Ray through C → retraces its path
  • Convex mirror: (i) Ray parallel to principal axis → appears to come from F (behind mirror) (ii) Ray directed towards F → becomes parallel (iii) Ray towards C → retraces path
  • Convex lens: (i) Ray parallel to principal axis → passes through F on other side (ii) Ray through F → becomes parallel (iii) Ray through optical centre → goes straight
  • Concave lens: (i) Ray parallel to principal axis → appears to diverge from F on same side (ii) Ray directed towards F on other side → becomes parallel (iii) Ray through optical centre → goes straight
  • Always draw at least two rays to locate the image. Mark the image with an arrow showing orientation

Tips & Common Mistakes

  • Sign convention is crucial — always follow New Cartesian sign convention. Object distance (u) is always negative for real objects
  • For mirrors: use 1/v + 1/u = 1/f. For lenses: use 1/v - 1/u = 1/f. Do NOT mix them up
  • Focal length of concave mirror and convex lens is positive (+); Focal length of convex mirror and concave lens is negative (-)
  • Magnification: For mirror m = -v/u; For lens m = v/u — note the negative sign difference
  • When drawing ray diagrams, ensure arrows on rays show the correct direction of light propagation
  • A concave mirror can form both real and virtual images depending on object position; a convex mirror always forms virtual images

Chapter 10

6 sections

Key Concepts

  • The human eye is a natural optical instrument that uses a convex lens system to form real, inverted, diminished images on the retina
  • Cornea: Transparent front part of the eye that refracts most of the light entering the eye
  • Iris: Coloured, muscular diaphragm that controls the size of the pupil (and hence the amount of light entering)
  • Eye lens: A crystalline, flexible, convex lens whose focal length can be adjusted by ciliary muscles — this is called accommodation
  • Retina: Light-sensitive screen at the back of the eye containing rod cells (dim light, no colour) and cone cells (bright light, colour vision)
  • Near point (D) = 25 cm (least distance of distinct vision); Far point = infinity for a normal eye

Defects of Vision and Correction

  • Myopia (Short-sightedness): Can see nearby objects clearly but not distant ones. Image forms in front of retina. Corrected by concave lens
  • Myopia causes: Elongation of eyeball or excessive curvature of eye lens (focal length becomes too short)
  • Hypermetropia (Long-sightedness): Can see distant objects clearly but not nearby ones. Image forms behind retina. Corrected by convex lens
  • Hypermetropia causes: Shortening of eyeball or flattening of eye lens (focal length becomes too long). Near point shifts beyond 25 cm
  • Presbyopia: Age-related weakening of ciliary muscles, reducing accommodation. Both near and far vision affected. Corrected by bifocal lenses (upper concave, lower convex)
  • Cataract: Eye lens becomes cloudy/opaque due to membrane growth, causing partial or complete loss of vision. Corrected by surgery (replacing opaque lens with artificial lens)

Refraction Through a Prism

  • A prism has two triangular bases and three rectangular lateral surfaces. The angle between the two refracting surfaces is the angle of the prism (A)
  • When white light enters a glass prism, it splits into 7 colours (VIBGYOR): Violet, Indigo, Blue, Green, Yellow, Orange, Red — this is called dispersion
  • Violet deviates the most (shortest wavelength, highest refractive index); Red deviates the least (longest wavelength, lowest refractive index)
  • Angle of deviation (D) = Angle of incidence + Angle of emergence - Angle of prism: D = i + e - A
  • Newton showed that prism does not create colours — it merely separates them. He recombined spectrum using an inverted prism to get white light

Atmospheric Refraction Phenomena

  • Twinkling of stars: Due to atmospheric refraction. Starlight passes through layers of air with different densities, causing apparent position to change rapidly
  • Stars twinkle but planets do not — planets are much closer and appear as extended sources (not point sources), so individual fluctuations average out
  • Advanced sunrise and delayed sunset: Sun is visible about 2 minutes before actual sunrise and 2 minutes after actual sunset due to atmospheric refraction bending sunlight
  • The Sun appears flattened (oval) at sunrise/sunset because light from the lower edge is refracted more than light from the upper edge
  • Mirage: Seen in deserts. Hot air near ground is less dense (lower refractive index), light bends away from normal progressively until total internal reflection occurs, creating illusion of water

Scattering of Light

  • Tyndall effect: Scattering of light by colloidal particles (dust, smoke, tiny water droplets). Makes the path of light visible (e.g., sunbeam through a window)
  • Rayleigh scattering: Intensity of scattered light is inversely proportional to the fourth power of wavelength (I ∝ 1/λ⁴)
  • Sky appears blue because blue light (shorter wavelength) is scattered much more than red light by atmospheric particles
  • Sun appears red/orange at sunrise and sunset: Light travels longer path through atmosphere, shorter wavelengths (blue/violet) scatter away, only longer wavelengths (red/orange) reach the eye
  • Danger signals are red because red light scatters the least (longest wavelength) and can travel the farthest through fog, dust, and smoke

Tips & Common Mistakes

  • In myopia, the far point shifts from infinity to a nearer point. In hypermetropia, the near point shifts beyond 25 cm — know these clearly
  • Power of correcting lens for myopia: P = -1/far point (in metres). For hypermetropia: P = 1/d - 1/D where d = defective near point, D = 0.25 m
  • Rainbow formation involves refraction, dispersion, and total internal reflection inside water droplets. Primary rainbow: violet inside, red outside
  • Do not confuse dispersion (splitting of white light into colours by a prism) with scattering (deflection of light by small particles)
  • VIBGYOR order: Violet has shortest wavelength (380 nm) and highest frequency; Red has longest wavelength (700 nm) and lowest frequency
  • Accommodation: When viewing distant objects, ciliary muscles relax and lens becomes thin (longer f). For near objects, muscles contract and lens becomes thick (shorter f)

Chapter 11

6 sections

Key Concepts

  • Electric current (I) is the rate of flow of electric charge: I = Q/t. Unit: Ampere (A). 1 A = 1 C/s
  • Electric potential difference (V) between two points is the work done per unit charge: V = W/Q. Unit: Volt (V). 1 V = 1 J/C
  • Resistance (R) is the opposition offered by a conductor to the flow of current. Unit: Ohm (Ω). 1 Ω = 1 V/1 A
  • Ohm's Law: At constant temperature, the current through a conductor is directly proportional to the potential difference across it: V = IR
  • Resistivity (ρ) is a material property: R = ρl/A where l = length, A = cross-sectional area. Unit: Ω·m. Resistivity depends on material and temperature, not dimensions
  • Electric power (P) is the rate of doing electrical work: P = VI = I²R = V²/R. Unit: Watt (W). 1 kW = 1000 W

Important Formulas

  • Ohm's Law: V = IR → I = V/R → R = V/I
  • Resistance of a wire: R = ρl/A (ρ = resistivity, l = length, A = cross-sectional area)
  • Series combination: R(total) = R₁ + R₂ + R₃ + ... (current same, voltage divides)
  • Parallel combination: 1/R(total) = 1/R₁ + 1/R₂ + 1/R₃ + ... (voltage same, current divides)
  • Electric power: P = VI = I²R = V²/R
  • Electrical energy: E = P × t = VIt = I²Rt = V²t/R. Unit: Joule (J) or kilowatt-hour (kWh). 1 kWh = 3.6 × 10⁶ J
  • Joule's law of heating: H = I²Rt (heat produced in a resistor)

Series and Parallel Circuits

  • Series circuit: Components connected end-to-end. Same current flows through all. Total voltage = V₁ + V₂ + V₃. Total resistance increases
  • In series: If one component fails, the entire circuit breaks. Used in decorative lights (old-style Christmas lights)
  • Parallel circuit: Components connected across same two points. Same voltage across all. Total current = I₁ + I₂ + I₃. Total resistance decreases
  • In parallel: If one component fails, others continue to work. Used in household wiring (all appliances get same 220V)
  • Equivalent resistance in parallel is always less than the smallest individual resistance
  • Household circuits use parallel connections so each appliance gets full voltage and can be switched on/off independently

Heating Effect of Electric Current

  • When current flows through a resistor, electrical energy is converted to heat (Joule heating): H = I²Rt
  • Applications: Electric heater, electric iron, electric toaster, electric bulb (filament glows due to heating)
  • Electric fuse: A safety device made of low melting point alloy. Melts and breaks the circuit when current exceeds rated value, preventing damage
  • Fuse is always connected in series with the live wire. Common fuse ratings: 1A, 2A, 3A, 5A, 10A, 15A
  • Tungsten is used as filament in bulbs because it has a very high melting point (3380°C) and emits light at high temperature
  • Electric heaters use alloys like Nichrome (Ni + Cr + Mn + Fe) because of high resistivity and high melting point, and it does not oxidise easily

Practical Applications

  • Cost of electricity: Energy (kWh) = Power (kW) × Time (h). Cost = Energy × Rate per unit. 1 unit = 1 kWh
  • Example: A 100 W bulb used for 10 hours daily for 30 days: E = 0.1 kW × 10 h × 30 = 30 kWh = 30 units
  • Ammeter: Measures current, connected in series (low resistance). Voltmeter: Measures potential difference, connected in parallel (high resistance)
  • In domestic circuits: Live wire (red) at 220V, Neutral wire (black) at 0V, Earth wire (green) for safety — connected to metal body of appliances
  • MCB (Miniature Circuit Breaker) is a modern replacement for fuse — can be reset after tripping, does not need replacement

Tips & Common Mistakes

  • Conventional current flows from positive to negative terminal (opposite to electron flow) — exams always use conventional current direction
  • In series: current is same everywhere, voltage divides. In parallel: voltage is same everywhere, current divides — this is the most important distinction
  • Resistance increases with length (R ∝ l) and decreases with area (R ∝ 1/A). Doubling length doubles R; doubling diameter reduces R to 1/4
  • When solving numerical problems, always convert units first: mA to A, kΩ to Ω, minutes to seconds, kW to W
  • The V-I graph for a conductor obeying Ohm's law is a straight line through the origin. Slope = 1/R
  • Do not confuse resistance (property of a specific conductor) with resistivity (property of the material). Same material can have different R but same ρ

Chapter 12

6 sections

Key Concepts

  • A magnetic field is the region around a magnet (or current-carrying conductor) where a magnetic force can be experienced. Represented by magnetic field lines
  • Magnetic field lines emerge from North pole and merge at South pole (outside the magnet). Inside the magnet, they go from South to North
  • Properties of field lines: They never cross each other, are closed continuous curves, closer lines indicate stronger field, direction shown by compass needle
  • Oersted's experiment: A current-carrying conductor produces a magnetic field around it. Reversing current reverses the direction of the field
  • Electromagnetic induction (Faraday's discovery): A changing magnetic field in a coil induces an electric current (EMF) in the coil
  • Fleming's Left Hand Rule (Motor): Forefinger = Field (B), Middle finger = Current (I), Thumb = Force/Motion — for force on current-carrying conductor in magnetic field

Magnetic Field Patterns

  • Straight current-carrying conductor: Magnetic field lines are concentric circles around the wire. Direction found by Right Hand Thumb Rule
  • Right Hand Thumb Rule: Thumb points in direction of current, curled fingers show direction of magnetic field lines
  • Solenoid: A coil of many circular turns of insulated wire. Magnetic field inside a solenoid is uniform (parallel, equally spaced lines) — resembles a bar magnet
  • Electromagnet: A solenoid with a soft iron core inside. Stronger than a solenoid alone. Can be switched on/off (unlike permanent magnets)
  • Strength of electromagnet depends on: Number of turns in the coil, current through the coil, and nature of core material
  • Soft iron is used in electromagnets because it is easily magnetised and demagnetised. Steel retains magnetism — used for permanent magnets

Force on Current-Carrying Conductor

  • A current-carrying conductor placed in a magnetic field experiences a force (Lorentz force). This is the principle of the electric motor
  • Force is maximum when current is perpendicular to the magnetic field, and zero when current is parallel to the field
  • Fleming's Left Hand Rule gives the direction of force: Hold left hand with forefinger, middle finger, and thumb mutually perpendicular
  • Electric motor converts electrical energy into mechanical energy. Uses: fans, washing machines, mixers, electric vehicles
  • DC motor components: Armature (coil), Field magnet, Split ring commutator (reverses current direction every half rotation), Brushes (maintain contact), Axle
  • The commutator ensures the coil continues to rotate in the same direction by reversing the current every half turn

Electromagnetic Induction

  • Faraday's law: An EMF is induced in a coil whenever the magnetic flux through it changes. Greater the rate of change, greater the induced EMF
  • Methods to induce current: (i) Move a magnet towards/away from a coil (ii) Move a coil towards/away from a magnet (iii) Change current in a nearby coil
  • Fleming's Right Hand Rule (Generator): Thumb = Motion, Forefinger = Field (B), Middle finger = Induced current direction
  • Electric generator converts mechanical energy into electrical energy — the reverse of a motor
  • AC generator uses slip rings (produces alternating current that changes direction periodically). DC generator uses split ring commutator
  • In India: AC supply is 220V, frequency 50 Hz (current changes direction 100 times per second, i.e., 50 complete cycles)

Domestic Electric Circuits

  • Household supply: Live wire (red, 220V AC), Neutral wire (black, 0V), Earth wire (green, connected to ground for safety)
  • Main fuse → Electric meter → Distribution box → Separate circuits for lighting (5A) and power/heavy appliances (15A)
  • Short circuit: Live wire touches neutral wire directly → very large current flows → overheating → fire. Prevented by fuse/MCB
  • Overloading: Too many appliances connected to same circuit → total current exceeds safe limit → overheating. Prevented by using separate circuits
  • Earth wire provides a low-resistance path to ground — if metallic body of appliance becomes live, current flows to earth instead of through person

Tips & Common Mistakes

  • Do not confuse Fleming's Left Hand Rule (motor, force on conductor) with Fleming's Right Hand Rule (generator, induced current)
  • Left hand = Motor (force), Right hand = Generator (induced EMF) — remember: Motor = Left, Generator = Right
  • AC changes direction periodically (sine wave); DC flows in one direction only. Batteries give DC; power stations generate AC
  • AC advantage: Can be transmitted over long distances with less energy loss (using transformers to step up voltage)
  • The frequency of AC in India is 50 Hz — this means the current completes 50 cycles per second and changes direction 100 times per second
  • In Oersted's experiment, the compass needle deflects when current flows. When current is reversed, needle deflects in opposite direction. When current is off, needle returns to N-S

Chapter 13

6 sections

Key Concepts

  • Environment is the sum total of all living (biotic) and non-living (abiotic) factors that surround and affect an organism
  • Ecosystem is a self-sustaining unit where living organisms interact with each other and with their physical environment. Examples: Forest, pond, garden
  • Biotic components: Producers (autotrophs — plants), Consumers (heterotrophs — animals), Decomposers (saprophytes — bacteria, fungi)
  • Abiotic components: Temperature, rainfall, wind, soil, sunlight, water, minerals, humidity
  • Biodegradable substances: Can be broken down by biological processes (microorganisms). Examples: Paper, cotton, food waste, cow dung
  • Non-biodegradable substances: Cannot be broken down by biological processes. Examples: Plastic, glass, metals, DDT, polythene — they persist in environment

Food Chains and Food Webs

  • Food chain: A linear sequence showing transfer of energy from one trophic level to the next. Example: Grass → Grasshopper → Frog → Snake → Eagle
  • Trophic levels: T1 = Producers (plants), T2 = Primary consumers (herbivores), T3 = Secondary consumers (small carnivores), T4 = Tertiary consumers (top carnivores)
  • 10% Law (Lindeman): Only 10% of energy at one trophic level is transferred to the next level. The rest is lost as heat during respiration and life processes
  • Food web: A network of interconnected food chains in an ecosystem. More stable than a single food chain because organisms have multiple food sources
  • Maximum energy is available at the producer level; minimum at the top consumer level — this is why food chains rarely have more than 4-5 trophic levels
  • Decomposers break down dead organisms and waste matter, returning nutrients to the soil — they are essential for nutrient cycling in the ecosystem

Biological Magnification

  • Biological magnification (biomagnification) is the progressive increase in concentration of non-biodegradable toxic chemicals at each trophic level
  • Example: DDT (pesticide) sprayed on crops → absorbed by plants → grasshoppers → frogs → birds. Concentration increases at each step
  • Non-biodegradable chemicals cannot be metabolised or excreted — they accumulate in the body fat of organisms
  • Top predators (like eagles, humans) have the highest concentration of these toxins — causing reproductive failure, organ damage, and death
  • DDT was banned in many countries after its harmful effects on bird populations (egg-shell thinning) and human health were discovered

Ozone Layer and Its Depletion

  • Ozone (O₃) layer is found in the stratosphere (15-60 km above Earth). It shields life from harmful ultraviolet (UV) radiation of the Sun
  • Ozone formation: UV radiation splits O₂ → O + O. Then O + O₂ → O₃. Ozone also absorbs UV and splits back: O₃ → O₂ + O (dynamic equilibrium)
  • CFCs (chlorofluorocarbons) from refrigerators, ACs, aerosol sprays, and fire extinguishers are the main cause of ozone depletion
  • CFCs release chlorine atoms in the stratosphere that catalytically destroy ozone: Cl + O₃ → ClO + O₂; ClO + O → Cl + O₂ (one Cl atom can destroy thousands of O₃ molecules)
  • Ozone hole was first detected over Antarctica in 1985. UNEP (United Nations Environment Programme) led efforts to limit CFC production
  • Montreal Protocol (1987): International agreement to phase out ozone-depleting substances. CFCs replaced by HFCs (hydrofluorocarbons) which do not harm ozone

Waste Management

  • Biodegradable waste should be composted (aerobic decomposition) or used for biogas production (anaerobic decomposition) — converts waste to useful products
  • Non-biodegradable waste should be reduced, reused, and recycled (3Rs) to minimise environmental pollution
  • Plastic pollution: Single-use plastics (bags, bottles, straws) clog drains, harm marine life, and persist for hundreds of years. Ban on single-use plastics in India (2022)
  • E-waste (electronic waste): Contains toxic metals (lead, mercury, cadmium). Must be sent to authorised recycling facilities, not burned or dumped
  • Incineration reduces volume of waste but releases toxic gases. Sanitary landfills are lined to prevent groundwater contamination but have limited capacity

Tips & Common Mistakes

  • 10% Law: If producers have 10,000 J, primary consumers get 1,000 J, secondary consumers get 100 J, tertiary consumers get 10 J — memorise this pattern
  • Biological magnification affects non-biodegradable substances only — biodegradable substances are broken down and do not accumulate
  • Do not confuse food chain (linear) with food web (interconnected network). Ecosystem stability depends on food webs, not individual food chains
  • Ozone depletion and global warming are different problems: CFCs cause ozone depletion; CO₂ and CH₄ cause global warming (greenhouse effect)
  • Decomposers are not part of any specific trophic level — they operate at all levels by breaking down dead matter from every trophic level
  • In exam diagrams of food chains, always start with a producer and show arrows in the direction of energy flow (from eaten to eater)